CheckCardBoxAndDefectServer/app/utils/defect_inference/AnalyzeCenter.py

import cv2
import numpy as np
import json
import matplotlib.pyplot as plt
import math
from typing import Union, List
from app.core.logger import get_logger

logger = get_logger(__name__)

def get_points_from_file(json_file):
    """辅助函数，从JSON文件加载点"""
    with open(json_file, 'r') as f:
        data = json.load(f)
    return data['shapes'][0]['points']


def draw_rotated_bounding_boxes(image_path, inner_box_file, outer_box_file, output_path=None):
    """
    在图片上绘制内框和外框的旋转矩形。

    Args:
        image_path (str): 原始图片的文件路径。
        inner_box_file (str): 包含内框坐标的JSON文件路径。
        outer_box_file (str): 包含外框坐标的JSON文件路径。
        output_path (str, optional): 如果提供，结果图片将被保存到此路径。
                                     默认为None，不保存。
    """
    # 1. 读取图片
    image = cv2.imread(image_path)
    if image is None:
        print(f"错误: 无法读取图片 -> {image_path}")
        return

    print(f"成功加载图片: {image_path}")

    # 2. 读取坐标点
    inner_points = get_points_from_file(inner_box_file)
    outer_points = get_points_from_file(outer_box_file)

    if inner_points is None or outer_points is None:
        print("因无法加载坐标点，程序终止。")
        return

    # 定义颜色 (BGR格式)
    OUTER_BOX_COLOR = (0, 255, 0)  # 绿色
    INNER_BOX_COLOR = (0, 0, 255)  # 红色
    THICKNESS = 10  # 可以根据你的图片分辨率调整线宽

    # 3. 处理并绘制外框
    # 将点列表转换为OpenCV需要的NumPy数组
    outer_contour = np.array(outer_points, dtype=np.int32)
    # 计算最小面积旋转矩形
    outer_rect = cv2.minAreaRect(outer_contour)
    # 获取矩形的4个角点
    outer_box_corners = cv2.boxPoints(outer_rect)
    # 转换为整数，以便绘制
    outer_box_corners_int = np.intp(outer_box_corners)
    # 在图片上绘制轮廓
    cv2.drawContours(image, [outer_box_corners_int], 0, OUTER_BOX_COLOR, THICKNESS)
    print("已绘制外框 (绿色)。")

    # 4. 处理并绘制内框
    inner_contour = np.array(inner_points, dtype=np.int32)
    inner_rect = cv2.minAreaRect(inner_contour)
    inner_box_corners = cv2.boxPoints(inner_rect)
    inner_box_corners_int = np.intp(inner_box_corners)
    cv2.drawContours(image, [inner_box_corners_int], 0, INNER_BOX_COLOR, THICKNESS)
    print("已绘制内框 (红色)。")

    # 5. 保存结果 (如果指定了路径)
    if output_path:
        cv2.imwrite(output_path, image)
        print(f"结果已保存到: {output_path}")

    # 6. 显示结果
    # OpenCV使用BGR，Matplotlib使用RGB，需要转换颜色通道
    image_rgb = cv2.cvtColor(image, cv2.COLOR_BGR2RGB)

    # 使用Matplotlib显示，因为它在各种环境中（如Jupyter）表现更好
    plt.figure(figsize=(10, 15))  # 调整显示窗口大小
    plt.imshow(image_rgb)
    plt.title('旋转框可视化 (外框: 绿色, 内框: 红色)')
    plt.axis('off')  # 不显示坐标轴
    plt.show()


def analyze_centering_rotated(inner_points: Union[str, List], outer_points: Union[str, List], ):
    """
        使用旋转矩形进行最精确的分析, 包括定向边距和精确的浮点数比值。
    """
    if isinstance(inner_points, str):
        inner_points = get_points_from_file(inner_points)
    if isinstance(outer_points, str):
        outer_points = get_points_from_file(outer_points)

    # 将点列表转换为OpenCV需要的NumPy数组格式
    inner_contour = np.array(inner_points, dtype=np.int32)
    outer_contour = np.array(outer_points, dtype=np.int32)

    # 计算最小面积的旋转矩形
    # 结果格式: ((中心点x, 中心点y), (宽度, 高度), 旋转角度)
    inner_rect = cv2.minAreaRect(inner_contour)
    outer_rect = cv2.minAreaRect(outer_contour)

    # 获取矩形的4个角点, 并转化为坐标
    outer_box_corners = cv2.boxPoints(outer_rect)
    outer_box_corners_int = np.intp(outer_box_corners).tolist()

    inner_box_corners = cv2.boxPoints(inner_rect)
    inner_box_corners_int = np.intp(inner_box_corners).tolist()

    # --- 1. 标准化矩形尺寸，确保宽度总是长边 ---
    def standardize_rect(rect):
        (cx, cy), (w, h), angle = rect
        if w < h:
            # 如果宽度小于高度，交换它们，并调整角度
            w, h = h, w
            angle += 90
        return (cx, cy), (w, h), angle

    inner_center, inner_dims, inner_angle = standardize_rect(inner_rect)
    outer_center, outer_dims, outer_angle = standardize_rect(outer_rect)

    print("\n--- 基于旋转矩形的精确分析 ---")
    print(
        f"内框 (标准化后): 中心=({inner_center[0]:.1f}, {inner_center[1]:.1f}), 尺寸=({inner_dims[0]:.1f}, {inner_dims[1]:.1f}), 角度={inner_angle:.1f}°")
    print(
        f"外框 (标准化后): 中心=({outer_center[0]:.1f}, {outer_center[1]:.1f}), 尺寸=({outer_dims[0]:.1f}, {outer_dims[1]:.1f}), 角度={outer_angle:.1f}°")

    # --- 2. 评估居中度 (基于中心点) ---
    offset_x_abs = abs(inner_center[0] - outer_center[0])
    offset_y_abs = abs(inner_center[1] - outer_center[1])
    print(f"\n[居中度] 图像坐标系绝对中心偏移: 水平={offset_x_abs:.2f} px | 垂直={offset_y_abs:.2f} px")

    # --- 3. 评估平行度 ---
    angle_diff = abs(inner_angle - outer_angle)
    # 处理角度环绕问题 (例如 -89° 和 89° 其实只差 2°)
    angle_diff = min(angle_diff, 180 - angle_diff)
    print(f"[平行度] 角度差异: {angle_diff:.2f}° (值越小，内外框越平行)")

    # --- 4. 计算定向边距和比值 (核心部分) ---
    # 计算从外框中心指向内框中心的向量
    center_delta_vec = (inner_center[0] - outer_center[0], inner_center[1] - outer_center[1])

    # 将外框的旋转角度转换为弧度，用于三角函数计算
    angle_rad = math.radians(outer_angle)

    # 计算外框自身的坐标轴单位向量（相对于图像坐标系）
    # local_x_axis: 沿着外框宽度的方向向量
    # local_y_axis: 沿着外框高度的方向向量
    local_x_axis = (math.cos(angle_rad), math.sin(angle_rad))
    local_y_axis = (-math.sin(angle_rad), math.cos(angle_rad))

    # 使用点积 (dot product) 将中心偏移向量投影到外框的局部坐标轴上
    # 这能告诉我们，内框中心相对于外框中心，在“卡片自己的水平和垂直方向上”移动了多少
    offset_along_width = center_delta_vec[0] * local_x_axis[0] + center_delta_vec[1] * local_x_axis[1]
    offset_along_height = center_delta_vec[0] * local_y_axis[0] + center_delta_vec[1] * local_y_axis[1]

    # 计算水平和垂直方向上的总边距
    total_horizontal_margin = outer_dims[0] - inner_dims[0]
    total_vertical_margin = outer_dims[1] - inner_dims[1]

    # 根据投影的偏移量来分配总边距
    # 理想情况下，偏移为0，左右/上下边距各分一半
    # 如果有偏移，一侧增加，另一侧减少
    margin_left = (total_horizontal_margin / 2) - offset_along_width
    margin_right = (total_horizontal_margin / 2) + offset_along_width
    margin_top = (total_vertical_margin / 2) - offset_along_height
    margin_bottom = (total_vertical_margin / 2) + offset_along_height

    # print("\n[定向边距分析 (沿卡片方向)]")
    # print(f"水平边距 (像素): 左={margin_left:.1f} | 右={margin_right:.1f}")
    # print(f"垂直边距 (像素): 上={margin_top:.1f} | 下={margin_bottom:.1f}")
    #
    # print("\n[精确边距比值分析]")
    # # 直接展示浮点数比值
    # print(f"水平比值 (左:右) = {margin_left:.2f} : {margin_right:.2f}")
    # print(f"垂直比值 (上:下) = {margin_top:.2f} : {margin_bottom:.2f}")

    # 为了更直观，也可以计算一个百分比
    if total_horizontal_margin > 0:
        left_percent = (margin_left / total_horizontal_margin) * 100
        right_percent = (margin_right / total_horizontal_margin) * 100
        print(f"水平边距分布: 左 {left_percent:.1f}% | 右 {right_percent:.1f}%")

    if total_vertical_margin > 0:
        top_percent = (margin_top / total_vertical_margin) * 100
        bottom_percent = (margin_bottom / total_vertical_margin) * 100
        print(f"垂直边距分布: 上 {top_percent:.1f}% | 下 {bottom_percent:.1f}%")

    return ((left_percent, right_percent),
            (top_percent, bottom_percent),
            angle_diff), inner_box_corners_int, outer_box_corners_int


def formate_center_data(center_result,
                        inner_data: dict, outer_data: dict,
                        inner_rect_points: List, outer_rect_points: List):
    data = {
        "box_result": {
            "center_inference": {
                "angel_diff": center_result[2],
                "center_left": center_result[0][0],
                "center_right": center_result[0][1],
                "center_top": center_result[1][0],
                "center_bottom": center_result[1][1]
            }
        }
    }
    data['box_result']['inner_box'] = inner_data
    data['box_result']['outer_box'] = outer_data
    data['box_result']['inner_box']['shapes'][0]['rect_box'] = inner_rect_points
    data['box_result']['outer_box']['shapes'][0]['rect_box'] = outer_rect_points

    return data

# if __name__ == "__main__":
#     img_path = r"C:\Code\ML\Project\CheckCardBoxAndDefectServer\temp\250805_pokemon_0001.jpg"
#     inner_file_path = r"C:\Code\ML\Project\CheckCardBoxAndDefectServer\temp\inner\250805_pokemon_0001.json"
#     outer_file_path = r"C:\Code\ML\Project\CheckCardBoxAndDefectServer\temp\outer\250805_pokemon_0001.json"
#
#     inner_pts = get_points_from_file(inner_file_path)
#     print(inner_pts)
#     print(type(inner_pts))
#
#     result = analyze_centering_rotated(inner_file_path, outer_file_path)
#     print(result)
#     draw_rotated_bounding_boxes(img_path, inner_file_path, outer_file_path)